IAR Command Line Build Utility V8.2.2.5792
     Copyright 2002-2018 IAR Systems AB.

Building configuration: SIM145 - Debug
Updating build tree...

0  file(s) deleted.
Updating build tree...
os_cpu_a.asm
startup_efr32mg12p.s
AcmpForHAL.cpp 
AcmpForHALWithBsp.cpp 
Action.cpp 
Acmp.cpp 
AcmpForHALWithPrs.cpp 
AcmpListener.cpp 
Actuator.cpp 
Adc.cpp 
ActuatorSerialNumber.cpp 
ActionDynamicObject.cpp 
AdcChannel.cpp 
AdcCurrentSensor.cpp 
AdcChannelWithSingle.cpp 
AdcCurrentSensorForSingle.cpp 
AdcForHAL.cpp 
AdcListener.cpp 
AdcImpl.cpp 
AdcForHALWithSingle.cpp 
AdcVoltageSensor.cpp 
AllegroA4955.cpp 
AngleParameter.cpp 
AngleProtectionStrategyStep.cpp 
AngleStrengthStep.cpp 
AngularOverTemporaryLimitDetectorListener.cpp 
AngularPositionSensorListener.cpp 
AngularPositionSensorForMotorBasedOnActuator.cpp 
AngularPositionSensor.cpp 
AngularSpeedStep.cpp 
AngularOverTemporaryLimitDetector.cpp 
ApplicationCpu.c 
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Platform\Application\ApplicationCpu.c(121) : Warning[Pe177]: variable "loc_result" was declared but never referenced
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Platform\Application\ApplicationCpu.c(158) : Warning[Pe177]: variable "loc_GpioProfile" was declared but never referenced
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Platform\Application\ApplicationCpu.c(313) : Warning[Pa183]: #warning directive: " /!\ WDG is disabled "
AppSignature.c 
ArchiveForGas.cpp 
Archive.cpp 
ArchiverConsole.cpp 
Archiver.cpp 
ArchivingArea.c 
ArchivingObjectArea.c 
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\DataManagement\ObjectArchiver\ObjectArchiver\ArchivingArea\ArchivingObjectArea.c(541) : Warning[Pe177]: function "ArchivingObjectArea_PRV_CompareData" was declared but never referenced
AssertEMLIB.cpp 
Asynchronizer.cpp 
AsynchronizerByMessageBox.cpp 
ArrayOf160Char.cpp 
AsynchronousObject.cpp 
ApplicationMain.cpp 
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Application\Main\ApplicationMain.cpp(146) : Warning[Pe069]: integer conversion resulted in truncation
B2FM_EMS_RAZ.cpp 
B2FM_BadFlashAndRAM.cpp 
B2FM_Explicit_IOFrame.cpp 
B2FM_Explicit_IOFrame_OEM.cpp 
B2FM_Prog_7s_DPC.cpp 
B2FM_WarmResetMovement.cpp 
B2FM_WarmResetUnvalidEndLimit.cpp 
BackupAndObjectStorageCommon.c 
BatteryParameters.cpp 
Battery.cpp 
BatteryListener.cpp 
Buffer.cpp 
BaseTypeParameter.cpp 
ByMotherboard.cpp 
ByDomesticEquipment1D.cpp 
ByDoublePowerCutDE1DConsole.cpp 
ByRemoteDE1DConsole.cpp 
ByRemoteDE1DControlCenterPanel.cpp 
ByRemoteDE1DPanel.cpp 
ByRemoteDE1DControlCenterConsole.cpp 
Charger.cpp 
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\GAS\PowerSupply\Battery\Charger.cpp(61) : Warning[Pe940]: missing return statement at end of non-void function "Charger::GUARD_NeedToCharge"
Charger_liion.cpp 
Charger_NiMh.cpp 
Choregrapher.cpp 
Charger_Nicd.cpp 
CommercialSpeed.cpp 
Calibrator.cpp 
ComplexMotion.cpp 
Configurable.cpp 
ComplexMotionExecuter.cpp 
Configurator.cpp 
ChoregrapherByDomesticEquipment1D.cpp 
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\GAS\Equipment\DomesticEquipment1D\System\DomesticEquipment1D\ChoregrapherByDomesticEquipment1D.cpp(244) : Warning[Pa183]: #warning directive: "HIGH SPEED is not match real speed, please put real speed instead"
ConfiguratorTypes.cpp 
ConfiguratorParameter.cpp 
ConfiguratorParameterListener.cpp 
CurrentSensor.cpp 
CPU_PowerDriver.cpp 
CurrentSensorListener.cpp 
CurrentSensorWithSingle.cpp 
DataBase.c 
CurrentSensorImpl.cpp 
CurrentStatus.cpp 
DCIntensityAnalyzerListener.cpp 
DCIntensityAnalyzer.cpp 
DCDC_LDO_Peripheral.cpp 
DCPowerRange.cpp 
DcMotorParameters.cpp 
DCPowerSource.cpp 
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\GAS\PowerSupply\PowerSource\DCPowerSource.cpp(78) : Warning[Pe940]: missing return statement at end of non-void function "DCPowerSource::GetActualVoltage"
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\GAS\PowerSupply\PowerSource\DCPowerSource.cpp(86) : Warning[Pe940]: missing return statement at end of non-void function "DCPowerSource::GetMaxVoltage"
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\GAS\PowerSupply\PowerSource\DCPowerSource.cpp(94) : Warning[Pe940]: missing return statement at end of non-void function "DCPowerSource::GetMinVoltage"
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\GAS\PowerSupply\PowerSource\DCPowerSource.cpp(102) : Warning[Pe940]: missing return statement at end of non-void function "DCPowerSource::GetActualIntensity"
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\GAS\PowerSupply\PowerSource\DCPowerSource.cpp(110) : Warning[Pe940]: missing return statement at end of non-void function "DCPowerSource::GetMaxIntensity"
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\GAS\PowerSupply\PowerSource\DCPowerSource.cpp(118) : Warning[Pe940]: missing return statement at end of non-void function "DCPowerSource::GetMinIntensity"
DCPowerSourceListener.cpp 
DCPowerSourceParameters.cpp 
DCVoltageAnalyzerListener.cpp 
DcMotorForAllegroA4955.cpp 
DCVoltageAnalyzer.cpp 
DE1DConsoleInterface.cpp 
DE1DConsole.cpp 
DE1DControlCenterConsoleListener.cpp 
DE1DConsoleListener.cpp 
DE1DControlCenterListener.cpp 
DE1DControlCenter.cpp 
DistanceStrengthStep.cpp 
DistanceProtectionStrategyStep.cpp 
DomesticEquipment1DListener.cpp 
DoublePowerCutDE1DConsoleListener.cpp 
DE1DControlCenterInterface.cpp 
DoublePowerCutDE1DConsole.cpp 
DoublePowerCutDetector.cpp 
DoublePowerCutDetector_NRZ.cpp 
DoublePowerCutDetectorListener.cpp 
DoublePowerCutManager.cpp 
DomesticEquipment1D.cpp 
DoublePowerCutDetector_RZ.cpp 
DynamicAsynchronousObject.cpp 
ElectricRotaryMotorListener.cpp 
em_adc.c 
DrivingLoadDetector.cpp 
ElectricRotaryMotor.cpp 
em_acmp.c 
em_assert.c 
em_aes.c 
em_core.c 
em_burtc.c 
em_cmu.c 
em_cryotimer.c 
em_dac.c 
em_dbg.c 
em_ebi.c 
em_dma.c 
em_crypto.c 
em_gpcrc.c 
em_gpio.c 
em_i2c.c 
em_emu.c 
em_int.c 
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Platform\Common\HAL\HAL_SFY_EFR32MG\BSP\SOURCE\emlib\inc\em_int.h(49) : Warning[Pa183]: #warning directive: "The INT module is deprecated and marked for removal in a later release. Please use the new CORE module instead. See \"Porting from em_int\" in the CORE documentation for instructions."
em_idac.c 
em_lcd.c 
em_letimer.c 
em_ldma.c 
em_leuart.c 
em_lesense.c 
em_mpu.c 
em_msc.c 
em_opamp.c 
em_pcnt.c 
em_prs.c 
em_rtc.c 
em_rtcc.c 
em_rmu.c 
em_system.c 
em_timer.c 
em_vcmp.c 
em_vdac.c 
em_usart.c 
em_wdog.c 
EmbeddedTestsInterface.cpp 
EmbeddedTests.cpp 
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Application\Classes\Sim145EmbeddedTests\EmbeddedTests\EmbeddedTests.cpp(637) : Warning[Pe940]: missing return statement at end of non-void function "EmbeddedTests::CheckAllInactiveAndTerminateTestMode"
EndLimitsParameters.cpp 
EUSART.c 
FeedBackChoreography.cpp 
FeedbackName.cpp 
EndLimitAvoidanceRS.cpp 
EMSDateCodeOfMnfr.cpp 
FinalSlatTouchSensorListener.cpp 
FinalSlatTouchSensor.cpp 
FinalSlatTouchSensorBasedOnPosition.cpp 
FlashDriver.c 
GasFactoryConsoleListener.cpp 
FunctionningZone.cpp 
GearBox.cpp 
GasFactoryConsole.cpp 
GME41Frame.cpp 
GME41Message.cpp 
GME41ProtocolL2.cpp 
GME41ProtocolL5.cpp 
GME41DE1DConsole.cpp 
GME41ProtocolL6.cpp 
GasFactory.cpp 
HAL_SFY_Adc.c 
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Platform\Common\HAL\HAL_SFY_EFR32MG\Abstraction_Layer\SOURCE\Adc\HAL_SFY_Adc.c(367) : Warning[Pe069]: integer conversion resulted in truncation
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Platform\Common\HAL\HAL_SFY_EFR32MG\Abstraction_Layer\SOURCE\Adc\HAL_SFY_Adc.c(400) : Warning[Pe069]: integer conversion resulted in truncation
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Platform\Common\HAL\HAL_SFY_EFR32MG\Abstraction_Layer\SOURCE\Adc\HAL_SFY_Adc.c(548) : Warning[Pe069]: integer conversion resulted in truncation
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Platform\Common\HAL\HAL_SFY_EFR32MG\Abstraction_Layer\SOURCE\Adc\HAL_SFY_Adc.c(607) : Warning[Pe069]: integer conversion resulted in truncation
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Platform\Common\HAL\HAL_SFY_EFR32MG\Abstraction_Layer\SOURCE\Adc\HAL_SFY_Adc.c(709) : Warning[Pe069]: integer conversion resulted in truncation
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Platform\Common\HAL\HAL_SFY_EFR32MG\Abstraction_Layer\SOURCE\Adc\HAL_SFY_Adc.c(808) : Warning[Pe069]: integer conversion resulted in truncation
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Platform\Common\HAL\HAL_SFY_EFR32MG\Abstraction_Layer\SOURCE\Adc\HAL_SFY_Adc.c(874) : Warning[Pe069]: integer conversion resulted in truncation
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Platform\Common\HAL\HAL_SFY_EFR32MG\Abstraction_Layer\SOURCE\Adc\HAL_SFY_Adc.c(942) : Warning[Pe069]: integer conversion resulted in truncation
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Platform\Common\HAL\HAL_SFY_EFR32MG\Abstraction_Layer\SOURCE\Adc\HAL_SFY_Adc.c(1000) : Warning[Pe069]: integer conversion resulted in truncation
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Platform\Common\HAL\HAL_SFY_EFR32MG\Abstraction_Layer\SOURCE\Adc\HAL_SFY_Adc.c(1779) : Warning[Pe069]: integer conversion resulted in truncation
GoToPositionRS.cpp 
HAL_SFY_Core.c 
HAL_SFY_Bsp.c 
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Platform\Common\HAL\HAL_SFY_EFR32MG\BSP\SOURCE\emlib\inc\em_int.h(49) : Warning[Pa183]: #warning directive: "The INT module is deprecated and marked for removal in a later release. Please use the new CORE module instead. See \"Porting from em_int\" in the CORE documentation for instructions."
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Platform\Common\HAL\HAL_SFY_EFR32MG\Abstraction_Layer\SOURCE\Bsp\HAL_SFY_Bsp.c(243) : Warning[Pe223]: function "OSAL_SFY_Core_InterruptEntry" declared implicitly
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Platform\Common\HAL\HAL_SFY_EFR32MG\Abstraction_Layer\SOURCE\Bsp\HAL_SFY_Bsp.c(243) : Warning[Pe223]: function "Application_UserSystickStaticCallBack" declared implicitly
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Platform\Common\HAL\HAL_SFY_EFR32MG\Abstraction_Layer\SOURCE\Bsp\HAL_SFY_Bsp.c(243) : Warning[Pe223]: function "OSAL_SFY_Core_InterruptExit" declared implicitly
HAL_SFY_Dac.c 
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Platform\Common\HAL\HAL_SFY_EFR32MG\Abstraction_Layer\SOURCE\Dac\HAL_SFY_Dac.c(2210) : Warning[Pe177]: variable "loc_u8ElementIndex" was declared but never referenced
HAL_SFY_Gpio.c 
HAL_SFY_Clock.c 
HAL_SFY_AnalogCompare.c 
HAL_SFY_Module.c 
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Platform\Common\HAL\HAL_SFY_EFR32MG\Abstraction_Layer\SOURCE\Module\HAL_SFY_Module.c(277) : Warning[Pe223]: function "OSAL_SFY_Core_InterruptEntry" declared implicitly
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Platform\Common\HAL\HAL_SFY_EFR32MG\Abstraction_Layer\SOURCE\Module\HAL_SFY_Module.c(297) : Warning[Pe223]: function "OSAL_SFY_Core_InterruptExit" declared implicitly
HAL_SFY_Internal_StorageMemory.c 
HAL_SFY_Hw_InterruptVectors.c 
HAL_SFY_QuadDecoder.c 
HAL_SFY_Spi.c 
HAL_SFY_Types.c 
HAL_SFY_Uart.c 
HAL_SFY_StorageMemory.c 
HwTimer.cpp 
HAL_SFY_Timer.c 
IndustrialSmartMovementRS.cpp 
HAL_SFY_Watchdog.c 
IFmotionExecuterFactory.cpp 
IndustrialTestCallable.cpp 
IndustrialTestCallableBadCmd.cpp 
IndustrialTestCallableDecodeError.cpp 
IndustrialTestCallableListener.cpp 
IndustrialTestCallableFactory.cpp 
IndustrialTestCmdFreeRun1.cpp 
IndustrialTestCmdFreeRun2.cpp 
IndustrialTestCmdGetMtrCurrentInReq.cpp 
IndustrialTestCmdGetThermReq.cpp 
IndustrialTestCmdGetSignalPeriod.cpp 
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Application\Classes\Sim145EmbeddedTests\Sim145EmbeddedTests\IndustrialTestCmdGetSignalPeriod.cpp(26) : Warning[Pa181]: incompatible redefinition of macro "BYTE_MASK" (declared 
<SRCREF line=19 file="D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\IDE\IAR_ARM\..\..\SOURCE\Application\Classes\Sim145EmbeddedTests\GME41Protocol\GME41ProtocolL6.hpp"
>at line 19 of "D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\IDE\IAR_ARM\..\..\SOURCE\Application\Classes\Sim145EmbeddedTests\GME41Protocol\GME41ProtocolL6.hpp"
</SRCREF
>)
IndustrialTestCmdGetPLineReq.cpp 
IndustrialTestCmdPosition.cpp 
IndustrialTestCmdReadNodeAddressReq.cpp 
IndustrialTestCmdReadTstParamReq.cpp 
IndustrialTestCmdGetVoltReq.cpp 
IndustrialTestCmdReadCalRFReq.cpp 
IndustrialTestCmdRFReceivedRequest.cpp 
IndustrialTestCmdReadTstParamReqForTstParam.cpp 
IndustrialTestCmdRFTXCarrierReq.cpp 
IndustrialTestCmdSetExtPeriphPowerMode.cpp 
IndustrialTestCmdSetGpioOutputPin.cpp 
IndustrialTestCmdSetMtrSpeed.cpp 
IndustrialTestCmdSignReq.cpp 
IndustrialTestCmdWriteNodeAddressReq.cpp 
IndustrialTestCmdStop.cpp 
IndustrialTestCmdWriteTstParamReq.cpp 
IndustrialTestCmdWriteCalRFReq.cpp 
InputArchive.cpp 
IndustrialTestCmdWriteTstParamReqForTstParam.cpp 
IndustrialTestsDE1DConsoleInterface.cpp 
IoSAdapterForActuator.cpp 
IntercomDC.cpp 
IndustrialTestCmdWriteVersionReq.cpp 
IntermediatePositionsParameter.cpp 
IoSAdapterForActuatorByDoublePowerCutDE1DConsole.cpp 
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\PAL\ioSimplifiedDomesticEquipment1D\SOURCE\PrivateAdapterUtils.h(115) : Warning[Pe177]: variable "loc_pu8Buffer" was declared but never referenced
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\PAL\ioSimplifiedDomesticEquipment1D\SOURCE\IoSAdapterForActuatorByDoublePowerCutDE1DConsole.cpp(155) : Warning[Pe550]: variable "loc_u8WinkId" was set but never used
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\PAL\ioSimplifiedDomesticEquipment1D\SOURCE\IoSAdapterForActuatorByDoublePowerCutDE1DConsole.cpp(141) : Warning[Pe546]: transfer of control bypasses initialization of:
            variable "sAppBuffer" (declared 
<SRCREF line=152 file="D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\PAL\ioSimplifiedDomesticEquipment1D\SOURCE\IoSAdapterForActuatorByDoublePowerCutDE1DConsole.cpp"
>at line 152
</SRCREF
>)
            variable "u8ByteArray" (declared 
<SRCREF line=153 file="D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\PAL\ioSimplifiedDomesticEquipment1D\SOURCE\IoSAdapterForActuatorByDoublePowerCutDE1DConsole.cpp"
>at line 153
</SRCREF
>)
            variable "u8ArraySize" (declared 
<SRCREF line=154 file="D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\PAL\ioSimplifiedDomesticEquipment1D\SOURCE\IoSAdapterForActuatorByDoublePowerCutDE1DConsole.cpp"
>at line 154
</SRCREF
>)
            variable "loc_u8WinkId" (declared 
<SRCREF line=155 file="D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\PAL\ioSimplifiedDomesticEquipment1D\SOURCE\IoSAdapterForActuatorByDoublePowerCutDE1DConsole.cpp"
>at line 155
</SRCREF
>)
            variable "loc_u8WinkActivationStatus" (declared 
<SRCREF line=156 file="D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\PAL\ioSimplifiedDomesticEquipment1D\SOURCE\IoSAdapterForActuatorByDoublePowerCutDE1DConsole.cpp"
>at line 156
</SRCREF
>)
            variable "loc_u8WinkDuration" (declared 
<SRCREF line=157 file="D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\PAL\ioSimplifiedDomesticEquipment1D\SOURCE\IoSAdapterForActuatorByDoublePowerCutDE1DConsole.cpp"
>at line 157
</SRCREF
>)
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\PAL\ioSimplifiedDomesticEquipment1D\SOURCE\IoSAdapterForActuatorByDoublePowerCutDE1DConsole.cpp(229) : Warning[Pa118]: mixing boolean and non-boolean types in a comparison results in the boolean being promoted
IoSAdapterForActuatorByIndustrialTestConsole.cpp 
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\PAL\ioSimplifiedDomesticEquipment1D\SOURCE\IoSAdapterForActuatorByIndustrialTestConsole.cpp(144) : Warning[Pe177]: variable "loc_u8TimeIndex" was declared but never referenced
IoSAdapterForActuatorByDomesticEquipment1D.cpp 
IoSAdapterForActuatorByRemoteDE1DControlCenterPanel.cpp 
IoSAdapterForActuatorByRemoteDE1DConsole.cpp 
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\PAL\ioSimplifiedDomesticEquipment1D\SOURCE\PrivateAdapterUtils.h(115) : Warning[Pe177]: variable "loc_pu8Buffer" was declared but never referenced
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\PAL\ioSimplifiedDomesticEquipment1D\SOURCE\IoSAdapterForActuatorByRemoteDE1DConsole.cpp(116) : Warning[Pe550]: variable "loc_u8WinkId" was set but never used
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\PAL\ioSimplifiedDomesticEquipment1D\SOURCE\IoSAdapterForActuatorByRemoteDE1DConsole.cpp(105) : Warning[Pe546]: transfer of control bypasses initialization of:
            variable "sAppBuffer" (declared 
<SRCREF line=113 file="D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\PAL\ioSimplifiedDomesticEquipment1D\SOURCE\IoSAdapterForActuatorByRemoteDE1DConsole.cpp"
>at line 113
</SRCREF
>)
            variable "u8ByteArray" (declared 
<SRCREF line=114 file="D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\PAL\ioSimplifiedDomesticEquipment1D\SOURCE\IoSAdapterForActuatorByRemoteDE1DConsole.cpp"
>at line 114
</SRCREF
>)
            variable "u8ArraySize" (declared 
<SRCREF line=115 file="D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\PAL\ioSimplifiedDomesticEquipment1D\SOURCE\IoSAdapterForActuatorByRemoteDE1DConsole.cpp"
>at line 115
</SRCREF
>)
            variable "loc_u8WinkId" (declared 
<SRCREF line=116 file="D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\PAL\ioSimplifiedDomesticEquipment1D\SOURCE\IoSAdapterForActuatorByRemoteDE1DConsole.cpp"
>at line 116
</SRCREF
>)
            variable "loc_u8WinkActivationStatus" (declared 
<SRCREF line=117 file="D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\PAL\ioSimplifiedDomesticEquipment1D\SOURCE\IoSAdapterForActuatorByRemoteDE1DConsole.cpp"
>at line 117
</SRCREF
>)
            variable "loc_u8WinkDuration" (declared 
<SRCREF line=118 file="D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\PAL\ioSimplifiedDomesticEquipment1D\SOURCE\IoSAdapterForActuatorByRemoteDE1DConsole.cpp"
>at line 118
</SRCREF
>)
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\PAL\ioSimplifiedDomesticEquipment1D\SOURCE\IoSAdapterForActuatorByRemoteDE1DConsole.cpp(363) : Warning[Pa118]: mixing boolean and non-boolean types in a comparison results in the boolean being promoted
IoSAdapterForActuatorByRemoteDE1DPanel.cpp 
IoSAdapterForActuatorByRemoteDE1DControlCenterConsole.cpp 
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\PAL\ioSimplifiedDomesticEquipment1D\SOURCE\IoSAdapterForActuatorByRemoteDE1DControlCenterConsole.cpp(63) : Warning[Pa183]: #warning directive: only override existing in IoSimplified: duplicated Adapter in IoSStack
IoSAdapterForSensorByDetector.cpp 
IoSAdapterForSensorBySensor.cpp 
IoSStackListener.cpp 
IoSAdapterForSensorByEnvironmentalDE1DConsole.cpp 
IoStackOsInterface.c 
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\Media\ioStack\ioStack\Classes\ioStackCommon\io_Types.h(81) : Warning[Pa181]: incompatible redefinition of macro "CONST_ARG" (declared 
<SRCREF line=51 file="D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\IDE\IAR_ARM\..\..\SOURCE\Platform\Common\HAL\HAL_SFY_EFR32MG\Abstraction_Layer\SOURCE\TypesDefinition\OldTypesDefinition\SFY_Types.h"
>at line 51 of "D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\IDE\IAR_ARM\..\..\SOURCE\Platform\Common\HAL\HAL_SFY_EFR32MG\Abstraction_Layer\SOURCE\TypesDefinition\OldTypesDefinition\SFY_Types.h"
</SRCREF
>)
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\Media\ioStack\ioStack\Classes\ioStackCommon\io_Types.h(120) : Warning[Pe301]: typedef name has already been declared (with same type)
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\Media\ioStack\ioStack\Classes\ioStackCommon\io_Types.h(125) : Warning[Pe301]: typedef name has already been declared (with same type)
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\Media\ioStack\ioStack\Classes\ioStackCommon\io_Types.h(129) : Warning[Pe301]: typedef name has already been declared (with same type)
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\Media\ioStack\ioStack\Classes\ioStackCommon\io_Types.h(134) : Warning[Pe301]: typedef name has already been declared (with same type)
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\Media\ioStack\ioStack\Classes\ioStackCommon\io_Types.h(138) : Warning[Pe301]: typedef name has already been declared (with same type)
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\Media\ioStack\ioStack\Classes\ioStackCommon\io_Types.h(141) : Warning[Pe301]: typedef name has already been declared (with same type)
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\Media\ioStack\ioStack\Classes\ioStackCommon\io_Types.h(150) : Warning[Pe301]: typedef name has already been declared (with same type)
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\Media\ioStack\ioStack\Classes\ioStackCommon\io_Types.h(155) : Warning[Pe301]: typedef name has already been declared (with same type)
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\Media\ioStack\ioStack\Classes\ioStackCommon\io_Types.h(163) : Warning[Pe301]: typedef name has already been declared (with same type)
IoSStackControlInterface.cpp 
ITimerFactory.cpp 
LastEventOfLastStop.cpp 
Liion.cpp 
IoSStack.cpp 
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\Media\IoSProtocol\IoSStack.cpp(1332) : Warning[Pe177]: variable "loc_bIsObjectExists" was declared but never referenced
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\Media\IoSProtocol\IoSStack.cpp(1449) : Warning[Pe940]: missing return statement at end of non-void function "IoSStack::LowPowerWanted"
LinearPositionSensorListener.cpp 
LinearPositionSensor.cpp 
LinearPositionSensorBasedOnTranslater.cpp 
LinearSpeedStep.cpp 
MechanicalActuator.cpp 
LongMechanicalFeedBack.cpp 
LowBatteryFeedBackChoreography.cpp 
MechanicalMotion.cpp 
MechanicalFeedBack.cpp 
MotherParameter.cpp 
Motherboard.cpp 
MotherboardByIoS.cpp 
Motion.cpp 
MotionExecuterListener.cpp 
Motor.cpp 
MotionExecuterFactoryForRs.cpp 
Movable.cpp 
MotionExecuter.cpp 
main.cpp 
MotorIdentificationNameCommercialName.cpp 
NbChargeExtPS.cpp 
NbNominalInit.cpp 
NbDPC.cpp 
NbResetBrownOut.cpp 
MoveRS.cpp 
NbOfStorageMode.cpp 
NbResetExtPin.cpp 
NbResetCRC.cpp 
NbResetSystem.cpp 
NbResetOthers.cpp 
NbResetTotal.cpp 
NbResetWarm.cpp 
NbSwitchBatteryStateLowToCritical.cpp 
NbShutdown.cpp 
NbResetWatchdog.cpp 
NbSwitchBatteryStateOkToLow.cpp 
NominalTorque.cpp 
NiCd.cpp 
NiMh.cpp 
ObjectArchiverConfig.c 
ObjectArchiver.c 
ObstacleDetector.cpp 
ObstacleDetectorListener.cpp 
ObstacleDestressRS.cpp 
ObjectStorageArea.c 
OEM_CodeNb.cpp 
ODSArrayParameter.cpp 
ObstacleUpReleaseRS.cpp 
OEM_OFNb.cpp 
OEMAccessCode.cpp 
OEMBattery.cpp 
OEMClientModel.cpp 
OEMCustomerProdDate.cpp 
OEMFreeWord.cpp 
OEMName.cpp 
OEMProdSite.cpp 
OEMSolarPanel.cpp 
OEMResetRegistry.cpp 
OpenworkSlatCurtainListener.cpp 
OEMWorkstationNb.cpp 
OperatingSystemResources.c 
os_core.c 
OpenworkSlatCurtain.cpp 
OperatingZone.cpp 
os_flag.c 
os_cpu_c.c 
os_q.c 
os_time.c 
os_sem.c 
os_tmr.c 
os_task.c 
OSAL_SFY_Core.c 
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Platform\Common\OSAL\OSAL_uCOS-II\Abstraction_Layer\Core\OSAL_SFY_Core.c(271) : Warning[Pe186]: pointless comparison of unsigned integer with zero
OSAL_SFY_EventGroup.c 
OSAL_SFY_EXT_Core.c 
OSAL_SFY_EXT_EventTimer.c 
OSAL_SFY_InternalCore.c 
OSAL_SFY_Mailbox.c 
OSAL_SFY_EXT_MsgBox.c 
OSAL_SFY_ModuleService.c 
OSAL_SFY_MsgQueue.c 
OSAL_SFY_Semaphore.c 
OSAL_SFY_Statistic.c 
OSAL_SFY_Timer.c 
OSAL_SFY_Task.c 
OutputArchive.cpp 
OutputSizeArchive.cpp 
OsalTimerFactory.cpp 
OsalTimer.cpp 
OverStrengthDetectionAlgorithm.cpp 
OverStrengthDetectionAlgorithmForRsDcMotor.cpp 
OverStrengthDetectionDownAlgorithmForRsDcMotor.cpp 
OverStrengthDetector.cpp 
OverStrengthDetectorListener.cpp 
OverStrengthDetectionUpAlgorithmForRsDcMotor.cpp 
OverStrengthDetectorManagerInterface.cpp 
OverTemperatureDetectorListener.cpp 
OverTemperatureDetector.cpp 
OverStrengthDetectorManager.cpp 
PairedProductAddress.cpp 
ParametersRegistry.cpp 
PartNumber.cpp 
PersistentObject.cpp 
Peripheral.cpp 
PeripheralListener.cpp 
OverStrengthDetectorForRsDcMotor.cpp 
PositionTranslation.cpp 
PlatformResources.c 
PositionTranslationExecuter.cpp 
PowerRange.cpp 
PowerSaverForActuator.cpp 
PowerSaverForActuatorListener.cpp 
PowerSaverForActuatorByMotherboard.cpp 
PowerSupplyListener.cpp 
PowerSourceListener.cpp 
PowerSupply.cpp 
PowerSource.cpp 
PowerSupplyMin.cpp 
PowerSupplyMaxRMS.cpp 
PowerSupplySource.cpp 
PwmMotorDriverListener.cpp 
ProductionDate.cpp 
PwmMotorDriver.cpp 
QuadDecoderDriver.cpp 
QT40_Diag.c 
QuadDecoderDriverListener.cpp 
PrivateCommandsAdapter.cpp 
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\PAL\ioSimplifiedDomesticEquipment1D\SOURCE\PrivateCommandsAdapter.cpp(59) : Warning[Pe550]: variable "loc_u8TimeIndex" was set but never used
RamPool.c 
RandomGenerator.c 
Query.c 
RealTimeOperationListener.cpp 
Relay.cpp 
RechargeableBattery.cpp 
RelayForHAL.cpp 
QuadDecoderForHAL.cpp 
RemoteDE1DConsoleAddress.cpp 
RemoteDE1DConsoleAddressForIo.cpp 
RemoteDE1DControlCenterPanel.cpp 
RemoteDE1DControlCenterPanelListener.cpp 
RemoteDE1DControlCenterConsoleWithTimeout.cpp 
RemoteDE1DConsole.cpp 
RemoteDE1DPanelListener.cpp 
ResetListener.cpp 
RemoteDE1DControlCenterConsole.cpp 
RemoteDE1DPanel.cpp 
Reset.cpp 
RingBuffer.cpp 
ResetParam.cpp 
Roller.cpp 
ResetRegistry.cpp 
Rollable.cpp 
RollerMoverListener.cpp 
RollerShutterListener.cpp 
RotaryActuator.cpp 
RotaryActuatorListener.cpp 
RollerMover.cpp 
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\GAS\RollerMover\Base\RollerMover.cpp(170) : Warning[Pa089]: enumerated type mixed with another enumerated type
RollerShutter.cpp 
RotaryEncoderForQuadDecoderDriver.cpp 
RotationDirectionParameter.cpp 
RSOdsParameters.cpp 
RSLinearSpeedSensor.cpp 
RSMotorParameters.cpp 
RollTube.cpp 
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\PhysicalParameters\INCLUDE\PhysicalParameter\PhysicalParameter.h(145) : Warning[Pa093]: implicit conversion from floating point to integer
          detected during instantiation of "inline TPhysicalParameterClass PhysicalParameter<TPhysicalParameterClass, TeUnitsType, TValueType>::operator*(Type const &) const [with TPhysicalParameterClass=Distance, TeUnitsType=DistanceUnits::TeUnits, TValueType=TS16, Type=TF32]" 
<SRCREF line=1160 file="D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\GAS\RollTube\Base\RollTube.cpp"
>at line 1160 of "D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\GAS\RollTube\Base\RollTube.cpp"
</SRCREF
>
SequentialComplexMotion.cpp 
SFY_Utilities.c 
SerialMedia.cpp 
SequentialMotionExecuter.cpp 
Sim145AuxiliaryPowerInput.cpp 
ShortMechanicalFeedBack.cpp 
SFUNotifier.cpp 
Sim145HwTimerFactory.cpp 
Sim145LiionBattery.cpp 
SIM145GME41DE1DConsole.cpp 
Sim145LiionCharger.cpp 
Sim145MainPowerInput.cpp 
Sim145NiMhBattery.cpp 
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Application\Classes\Sim145PowerSource\Sim145NiMhBattery.cpp(82) : Warning[Pe940]: missing return statement at end of non-void function "Sim145NiMhBattery::EstimateStateOfCharge"
Sim145Motherboard.cpp 
Sim145NiMhCharger.cpp 
Sim145PermanentPowerSource.cpp 
Sim145RSMotorParameters.cpp 
Sim145IndustrialTestCallableFactory.cpp 
Sim145SolarPanel.cpp 
Sim145TstParams.cpp 
Sim145SystemResetRegistry.cpp 
SimpleMotion.cpp 
Sim145SystemRegistry.cpp 
SOFOPUconfig.c 
SimpleMotionExecuter.cpp 
Sim145PowerSupply.cpp 
SlowMechanicalFeedBack.cpp 
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\GAS\Motion\SimpleMotion\PauseMotion.h(26) : Warning[Pe368]: class "PauseMotion" defines no constructor to initialize the following:
            reference member "PauseMotion::m_oDuration"
SolarPanel.cpp 
SolarPanelCurrentIC_Peripheral.cpp 
SpecialMechanicalFeedBack.cpp 
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\GAS\Motion\SimpleMotion\PauseMotion.h(26) : Warning[Pe368]: class "PauseMotion" defines no constructor to initialize the following:
            reference member "PauseMotion::m_oDuration"
SpecificMechanicalFeedBack.cpp 
D:\Jenkins_SIMU\workspace\SIM145_SIM145_BuildMulti_trunk\CODE\SOURCE\Common\Modules\GAS\Motion\SimpleMotion\PauseMotion.h(26) : Warning[Pe368]: class "PauseMotion" defines no constructor to initialize the following:
            reference member "PauseMotion::m_oDuration"
StatusOfIntermediatePosition.cpp 
StopRS.cpp 
StrengthTranslation.cpp 
StrongLockRS.cpp 
system_efr32mg12p.c 
StrengthTranslationExecuter.cpp 
SystemReset.cpp 
SystemResetRegistry.cpp 
SystemRegistry.cpp 
TimerListener.cpp 
TemporaryRemoteDE1DConsole.cpp 
Timer.cpp 
TimerSoftFactory.cpp 
TorqueStep.cpp 
TimeTranslation.cpp 
TimeTranslationExecuter.cpp 
TranslaterListener.cpp 
Task_Application.cpp 
Translater.cpp 
Translation.cpp 
TranslationStopExecuter.cpp 
TranslationStop.cpp 
TranslationExecuter.cpp 
TstParamCalRF.cpp 
TstParamEmsTestsFlags.cpp 
TravelZoneState.cpp 
TstParamDateCode.cpp 
TstParamManufOrder.cpp 
TstParamPlantCode.cpp 
TstParamRadioTestSignature.cpp 
TstParamVddMeasure.cpp 
TstParamVersion.cpp 
TypeOfSettingForEndLimits.cpp 
UartForHAL.cpp 
VisualPictogram.cpp 
UserDoublePowerCutDE1DConsole.cpp 
VoltageSensor.cpp 
VoltageSensorListener.cpp 
WithSingleInterface.cpp 
UserRemoteDE1DConsole.cpp 
ZoneWidthManager.cpp 
Linking
Warning[Lt009]: Inconsistent wchar_t size
            ChallMacUtils.o(IoStackLibForGas.a) has wchar_t size 16 bits
            Acmp.o and 924 other objects, some of them in PhysicalParameterProfile.a and 417 other libraries have wchar_t size 32 bits
Warning[Li026]: the module "ChallMacUtils.o(IoStackLibForGas.a)" (and 0 other modules) do not contain information to support Virtual Function Elimination
c_3Nm.out
Converting

Total number of errors: 0
Total number of warnings: 65